Sizing Guide

Five-Inch Or Six-Inch Gutters For Utah Snow Loads

The difference is two dollars a foot and the capacity to handle a March melt. Here is how we decide, run by run.

Frame
Seamless Protection
Vector (3)
Built To Last
Group (3)
Worry Free
Get in touch with us
Enter contact information below
Swifthand_Gutters_MascotOnly2
Swifthand_Gutter-team-members
Swifthand_Gutters_MascotOnly2

Forty Percent More Water For A Few Hundred Dollars

A five-inch K-style gutter carries roughly 1.2 gallons per linear foot and drains about 5,500 square feet of roof per downspout in a one-inch-per-hour storm. A six-inch gutter carries about 2 gallons per foot, drains roughly 7,900 square feet per downspout and takes a three-by-four downspout that is less likely to freeze solid or clog with cottonwood seed. On most Wasatch Front homes the price difference is about $2 per foot, or $300 to $500 on a whole house.

Most Utah ranches and two-stories on the valley floor are fine with five-inch. Bench and mountain homes, steep roofs, long eaves and metal roofs usually need six-inch on the main runs. We quote size run by run rather than one size for the house, which is why many of our installs are six-inch on the back eave and five-inch on the porch.

500+

Projects Completed

15+

Years Experience

100%

Licensed & Insured

7+

Year Warranty

Details

What To Know Before You Choose

Go To Six-Inch When

  • The roof pitch is 8/12 or steeper, so water hits the gutter fast and can overshoot five-inch
  • One eave collects water from a large or complex roof, or from a valley that concentrates flow
  • The home sits on the bench, in a canyon mouth or above 5,000 feet, where snowpack is deeper and spring melt is heavier
  • The roof is metal, which sheds water and snow in sheets
  • Downspouts freeze or clog every winter, because the larger outlet and three-by-four spout stay open longer
  • You already see overflow at the same corners every spring

Five-Inch Is Fine When

  • The roof is moderate pitch, under about 2,500 square feet and drains to four or more downspouts
  • The home is on the valley floor in Murray, Taylorsville, West Jordan, Orem or Layton’s west side
  • The run is a porch, bay window or small section with its own downspout
  • You are matching existing five-inch gutters on an addition and the system has never overflowed

What About Downspouts?

Downspout count matters as much as gutter size. One downspout per thirty to forty feet of gutter is the rule; many builder installs have half that, which is why corners overflow. Adding a downspout to a five-inch run is often cheaper than upsizing and solves the same problem. We look at both on every estimate. See downspouts and extensions.

Pricing

Five-inch seamless aluminum is $8 to $12 per foot installed and six-inch is $10 to $14, with two-by-three downspouts at $100 to $150 and three-by-four at $125 to $175. Full ranges are on the installation cost guide.

Compare the rest of the family: K-style, half-round, box and fascia gutters, five-inch vs six-inch, aluminum, steel and copper, and gutter colors. Or start at the gutter types overview.

FAQ

Common Questions

Do six-inch gutters look too big on a one-story house?

On most homes the extra inch is barely noticeable from the street. On a small cottage with low eaves we usually stay with five-inch and add downspouts instead.

Yes, and we often do: six-inch on the main eaves that carry the most roof, five-inch on porches and small sections.

Yes, six-inch hidden hangers, and we space them closer on heavy-snow eaves.

No. Ice dams come from roof heat loss and shade. Six-inch reduces overflow and freezing in the gutter, and heat tape addresses the ice.

Free Estimates Across The Wasatch Front

Not Sure Which Size? We Measure And Recommend