The profiles, sizes and metals we install, what each one is good at, and which ones hold up to Wasatch Front winters.



Every seamless gutter we form starts as a coil of metal on our truck, so the profile, size and material are your choice, not a default. Most Utah homes do well with five-inch K-style aluminum, but a steep roof, a long eave, a metal roof or a historic home can call for something different. This page explains the options the way we explain them at an estimate, with the trade-offs that matter in a climate that swings from a hundred-degree July to an ice-dam January.
If you already know what you need, request a free estimate and tell us. If you do not, we will measure the roof, look at the trees and the eaves, and recommend a profile, size and material run by run.
Projects Completed
Years Experience
Licensed & Insured
Year Warranty
The flat-backed, crown-molding-fronted profile on most homes built after 1960. Holds more water than a half-round of the same width, sits flush against the fascia, and takes hidden hangers easily. Our standard recommendation for Utah homes.
A smooth, open trough hung on brackets or rod hangers. Sheds debris more easily than K-style and looks right on Victorian, Craftsman and Tudor homes in the Avenues, Sugar House, Provo and Ogden’s East Bench. Carries slightly less water per inch of width, so we often size up.
A square, high-capacity profile used on commercial buildings, flat and low-slope roofs, and modern residential designs. Fabricated to the size the roof needs, with oversized outlets and downspouts.
A tall, flat-faced profile that doubles as the fascia board, giving a clean contemporary line on homes with exposed rafter tails or no fascia. Installed less often along the Wasatch Front but useful on specific designs.
A five-inch K-style gutter handles roughly 5,500 square feet of roof per downspout in a typical storm, which covers most Utah homes. A six-inch gutter holds about forty percent more water, takes a larger three-by-four downspout, and is far less likely to overflow when a winter’s worth of snow melts in a week.
We quote size run by run. Many homes get six-inch on the main eaves and five-inch on porches and small sections, which keeps the cost down without giving up capacity where it matters. See seamless gutter installation for the full process.
The standard for Utah homes. It does not rust, it comes in more than twenty-five baked-on colors, and the heavier .032 gauge we recommend resists denting from ladders, hail and ice. Formed on site to the exact length of each run.
Galvanized or Galvalume steel is stronger than aluminum and the right call under metal roofs, on mountain homes with heavy sliding snow, and on commercial buildings. It can rust at cut edges over time, so finish and sealing matter.
A lifetime material that never rusts and develops a natural patina over several years. Usually installed as half-round with round downspouts on historic and custom homes. Soldered joints instead of sealant.
Aluminum gutters come in white, bronze, black, clay, almond, several grays and browns, and a range of trim-matching shades. We bring a sample ring to every estimate so you can match the gutters to your fascia or trim rather than guessing from a chart. Downspouts, elbows and straps come in the same colors. HOA communities such as Daybreak and Traverse Mountain often restrict colors; we help with the approval. Because SwiftHand also paints exteriors, we can coordinate fascia repair and painting before the new gutters go up.
Any profile and material can be fitted with micro-mesh or screen gutter guards, self-regulating heat tape, and correctly sized downspouts and extensions. We quote each as a separate line so you can decide run by run.
Five-inch K-style seamless aluminum. It fits most roofs, holds plenty of water, takes hidden hangers and comes in the widest range of colors.
On steep roofs, long eaves, bench and mountain homes, and anywhere that overflows in spring, yes. On a small single-story roof, usually not. We size each run rather than quoting one size for the house.
Yes, when hung on rod hangers or heavy brackets and sized up to six-inch on main eaves. They shed debris well, which is a plus under trees.
The thinner .027 gauge can. We recommend .032 gauge for Utah, and steel for metal roofs or heavy-snow mountain homes.
No. It patinas naturally and does not rust. Soldered joints last decades. Keep it clear of debris like any gutter.
Usually. We carry more than twenty-five factory colors and can order custom-painted coil for larger projects.