Soffit & Fascia

Soffit And Fascia Repair In Salt Lake City

Rotted fascia and sagging soffit replaced before new gutters go up, by a crew that paints as well as it hangs gutters.

Gutter icon
Seamless Protection
Shield icon
Built To Last
Checkmark icon
Worry Free
Get in touch with us
Enter contact information below
SwiftHand Gutters mascot
The SwiftHand Gutters team
SwiftHand Gutters mascot

New Gutters On A Rotted Fascia Board Will Not Stay Up

The fascia is the board the gutter hangs from, and the soffit is the underside of the eave behind it. When gutters leak, overflow or pull away, water runs behind them and soaks both. By the time you see peeling paint, soft wood or a wavy gutter line, the board is often too rotted to hold a screw, and a new gutter hung on it will sag within a winter or two.

SwiftHand Gutters inspects fascia and soffit on every replacement and quotes repair as its own line. We replace rotted sections with primed wood or composite board, repair soffit and ventilation, and prime and paint to match before the new gutters go on. Because SwiftHand also runs an exterior painting company, the carpentry and the paint are done by one crew, on one visit.

500+

Projects Completed

15+

Years Experience

100%

Licensed & Insured

7+

Year Warranty

What We Do

Fascia And Soffit Services

  • Fascia board replacement for rotted, split or sagging sections, in primed wood or composite board
  • Full fascia replacement on homes where the board has failed along entire eaves
  • Soffit repair and replacement for water-damaged, sagging or pest-damaged panels, vented or solid
  • Drip edge and flashing installed or corrected so water goes into the gutter, not behind it
  • Rafter tail inspection and reporting when rot has reached the framing
  • Priming and painting to match the existing trim, before gutters are installed
  • New seamless gutters hung on the repaired board with hidden hangers

Signs Your Fascia Or Soffit Needs Attention

  • Peeling or bubbling paint along the roofline
  • Gutters that sag, pull away or have been re-nailed more than once
  • Dark staining on the fascia or soffit under the gutter
  • Soft spots when pressed, or visible splits and holes
  • Birds, wasps or squirrels getting into the eave
  • Water dripping between the gutter and the house instead of from the downspout

Fascia Repair Cost

Replacing a damaged section of fascia typically runs $8 to $20 per linear foot depending on material, height and access, including priming and painting. Soffit repair is quoted per section. Fascia work is always a separate line on your gutter replacement estimate so you can see exactly what the gutters cost and what the carpentry costs.

How It Works

How We Repair Fascia Before Hanging Gutters

01

Inspect Behind The Gutters

We probe the fascia along every run and look at the soffit and rafter tails. Rot is photographed and marked on your estimate.

02

Remove And Replace

Old gutters come down, rotted board is cut out and replaced with primed wood or composite, and the drip edge is corrected.

03

Prime And Paint

New boards are primed and painted to match your trim by our painting crew.

04

Hang The New Gutters

Seamless gutters go up on sound wood with hidden hangers, and we water test the system before we leave.

FAQ

Soffit And Fascia Questions

Can you repair fascia without replacing the gutters?

Yes. We remove the gutter, replace the board and rehang the existing gutter if it is sound. Often the gutter is the reason the board rotted, so we will tell you if replacement makes more sense.

Composite resists rot and holds paint longer; primed wood costs less and matches existing trim. We install both.

Yes. Priming and painting to match is included in our fascia pricing.

We stop and show you. Rafter tail repair is carpentry beyond the fascia, and we quote it separately or refer it depending on the extent.

Free Estimates Across The Wasatch Front

Peeling Paint Along The Roofline? Get A Free Inspection