Gutter Types & Materials

Gutter Types, Sizes And Materials For Utah Homes

The profiles, sizes and metals we install, what each one is good at, and which ones hold up to Wasatch Front winters.

Gutter icon
Seamless Protection
Shield icon
Built To Last
Checkmark icon
Worry Free
Get in touch with us
Enter contact information below
SwiftHand Gutters mascot
The SwiftHand Gutters team
SwiftHand Gutters mascot

Pick The Gutter That Fits Your Roof, Not The One On The Truck

Every seamless gutter we form starts as a coil of metal on our truck, so the profile, size and material are your choice, not a default. Most Utah homes do well with five-inch K-style aluminum, but a steep roof, a long eave, a metal roof or a historic home can call for something different. This page explains the options the way we explain them at an estimate, with the trade-offs that matter in a climate that swings from a hundred-degree July to an ice-dam January.

If you already know what you need, request a free estimate and tell us. If you do not, we will measure the roof, look at the trees and the eaves, and recommend a profile, size and material run by run.

500+

Projects Completed

15+

Years Experience

100%

Licensed & Insured

7+

Year Warranty

Profiles

Gutter Profiles We Install

K-Style

The flat-backed, crown-molding-fronted profile on most homes built after 1960. Holds more water than a half-round of the same width, sits flush against the fascia, and takes hidden hangers easily. Our standard recommendation for Utah homes.

  • Sizes: five-inch and six-inch
  • Materials: aluminum, steel, copper
  • Best for: nearly every residential roof

Half-Round

A smooth, open trough hung on brackets or rod hangers. Sheds debris more easily than K-style and looks right on Victorian, Craftsman and Tudor homes in the Avenues, Sugar House, Provo and Ogden’s East Bench. Carries slightly less water per inch of width, so we often size up.

  • Sizes: five-inch and six-inch
  • Materials: aluminum, copper, galvanized steel
  • Best for: historic and high-end homes

Box Gutters

A square, high-capacity profile used on commercial buildings, flat and low-slope roofs, and modern residential designs. Fabricated to the size the roof needs, with oversized outlets and downspouts.

  • Sizes: six-inch to eight-inch and custom
  • Materials: aluminum, steel
  • Best for: commercial, modern homes, large roof areas

Fascia Gutters

A tall, flat-faced profile that doubles as the fascia board, giving a clean contemporary line on homes with exposed rafter tails or no fascia. Installed less often along the Wasatch Front but useful on specific designs.

  • Sizes: five-inch and six-inch
  • Materials: aluminum
  • Best for: contemporary homes, exposed-rafter construction
Sizing

Five-Inch Or Six-Inch Gutters?

A five-inch K-style gutter handles roughly 5,500 square feet of roof per downspout in a typical storm, which covers most Utah homes. A six-inch gutter holds about forty percent more water, takes a larger three-by-four downspout, and is far less likely to overflow when a winter’s worth of snow melts in a week.

Go to six-inch when

  • The roof pitch is 8/12 or steeper, so water hits the gutter fast
  • One eave collects water from a large or complex roof, or from a valley
  • The home sits on the bench, in a canyon mouth or above 5,000 feet where snow and melt are heavier
  • The roof is metal, which sheds water and snow in sheets
  • You are already dealing with overflow at the same spots every spring

We quote size run by run. Many homes get six-inch on the main eaves and five-inch on porches and small sections, which keeps the cost down without giving up capacity where it matters. See seamless gutter installation for the full process.

Materials

Aluminum, Steel Or Copper?

Seamless Aluminum

The standard for Utah homes. It does not rust, it comes in more than twenty-five baked-on colors, and the heavier .032 gauge we recommend resists denting from ladders, hail and ice. Formed on site to the exact length of each run.

  • Gauge: .027 or .032 (we recommend .032)
  • Finish warranty: twenty years or more against fading and peeling
  • Cost: lowest of the three

Steel

Galvanized or Galvalume steel is stronger than aluminum and the right call under metal roofs, on mountain homes with heavy sliding snow, and on commercial buildings. It can rust at cut edges over time, so finish and sealing matter.

  • Best for: metal roofs, Park City, Alpine, Heber, commercial
  • Cost: moderately more than aluminum
  • Pairs with snow guards and heat tape

Copper

A lifetime material that never rusts and develops a natural patina over several years. Usually installed as half-round with round downspouts on historic and custom homes. Soldered joints instead of sealant.

  • Best for: historic, custom and high-end homes
  • Cost: several times aluminum
  • Lifespan: fifty years or more

Gutter Colors

Aluminum gutters come in white, bronze, black, clay, almond, several grays and browns, and a range of trim-matching shades. We bring a sample ring to every estimate so you can match the gutters to your fascia or trim rather than guessing from a chart. Downspouts, elbows and straps come in the same colors. HOA communities such as Daybreak and Traverse Mountain often restrict colors; we help with the approval. Because SwiftHand also paints exteriors, we can coordinate fascia repair and painting before the new gutters go up.

Guards, Heat Tape And Downspouts

Any profile and material can be fitted with micro-mesh or screen gutter guards, self-regulating heat tape, and correctly sized downspouts and extensions. We quote each as a separate line so you can decide run by run.

FAQ

Gutter Type And Material Questions

What gutter type is most common in Utah?

Five-inch K-style seamless aluminum. It fits most roofs, holds plenty of water, takes hidden hangers and comes in the widest range of colors.

On steep roofs, long eaves, bench and mountain homes, and anywhere that overflows in spring, yes. On a small single-story roof, usually not. We size each run rather than quoting one size for the house.

Yes, when hung on rod hangers or heavy brackets and sized up to six-inch on main eaves. They shed debris well, which is a plus under trees.

The thinner .027 gauge can. We recommend .032 gauge for Utah, and steel for metal roofs or heavy-snow mountain homes.

No. It patinas naturally and does not rust. Soldered joints last decades. Keep it clear of debris like any gutter.

Usually. We carry more than twenty-five factory colors and can order custom-painted coil for larger projects.

Free Estimates Across The Wasatch Front

Not Sure Which Gutter You Need? We'll Measure And Recommend